MS-01 Thickness Design--Asphalt (Ninth Edition)

The ninth edition presents a multi layered elastic design approach to pavement thickness design, rather than empirical. Three temperature conditions are included in the 36 design charts covering both SI (metric) and U.S. customary methods of measurement. 220 x 280 mm (8.5 x 11 in.) and spiral bound for use of use on flat surfaces; 110 pages plus durable cover. [A computerized version of the Thickness Design method is available (see CP-4 Asphalt Pavement Thickness Design of Highways and Overlays HWY.) - $22.00

MS-02 Mix Design Methods for Asphalt (Sixth Edition)

A practical guide to asphalt mix design (Marshall and Hveem) for engineers and students. Fully illustrated, 112 pages, 150 x 225 mm (6 x 9 in.). Computer-Assisted Asphalt Mix Analysis - CAMA (CP-6) provides computerized assistance for mix design - (see CP-6 (CAMA) - $20.00

MS-04 The Asphalt Handbook

The definitive book on the uses of asphalt. Chapters include types of asphalts, mix designs, mixing facilities, paving, compaction, surface treatments, recycling, maintenance, structural design, various miscellaneous uses and tables. Leatherette bound, 640 pages, 150 x 225 mm (6 x 9 in.) - $38.00

MS-05 Introduction To Asphalt (Eighth Edition)

Summary information relating to asphalts, uses, brief history, definitions, tests, and specifications. Fully illustrated, 74 pages, 150 x 225 mm (3.5 x 6 in.) - $16.00

MS-06 Asphalt Pocketbook of Useful Information (Sixth Edition)

A handy pocket reference containing tables (in both metric and U.S. units) on unloading tank cars, quantities of materials required for various widths and depths of construction, temperature-volume corrections for asphalt materials, plus other useful design and construction information. 144 pages, 90 x 150 mm (3.5 x 6 in.) - $12.00

MS-10 Soils Manual (Fifth Edition)

Data on general classification of soil and determination of strength values for design of asphalt pavement structures. Fully illustrated, 260 pages, 150 x 225 mm (6 x 9 in.) - $18.00

MS-11 Thickness Design--Asphalt Pavements for Air Carrier Airports (Third Edition)

Intended primarily for use by design engineers, this manual is an engineering guide for design and construction of airport pavements serving aircraft of more than 270kN (60,000 lb.) gross. Presents a fundamental, rational design procedure that is approved on a case-by-case basis by FAA. Includes 141 illustrations and 13 tables. Spiral bound, 236 pages, 220 x 280 mm (8.5 x 11 in.). Airport thickness design is available on a computer program - (see CP-3 AIRPORT) - $22.00

MS-12 Asphalt in Hydraulics (Second Edition)

Data for the guidance of those involved with the use of asphalt in the construction, maintenance and repair or reservoirs, dams, holding ponds, swimming pools, sanitary landfills and similar structures. Numerous photos and drawings, 80 pages, 220 x 280 mm (8.5 x 11 in.) - $12.00

MS-14 Asphalt Cold-Mix Manual (Third Edition)

The premiere guide for asphalt cold-mix design and construction. Included are guidelines for central plant mix and mixed-in-place construction; specifications for stockpile maintenance mixtures; and emulsified asphalt and cutback asphalt mixture design using either the Marshall or modified Hveem mix design methods. Illustrated with photos; 186 pages, 150 x 225 mm (6 x 9 in.) - $22.00

MS-16 Asphalt in Pavement Maintenance (Third Edition - 1996)

Provides practical information on methods, equipment, and terminology applying to the use of asphalt in maintenance of all types of pavement structures. Topics addressed include important maintenance considerations; asphalt materials used in pavement maintenance; descriptions of the types and causes of various distresses encountered in asphalt and concrete pavements; the proper maintenance procedures for repairing pavement distresses; and guidelines for designing patching mixtures. Illustrated with photos; paperback, 88 pages, 150 x 225 mm (6 x 9 in.) - $18.00

MS-17 Asphalt Overlays for Highway and Street Rehabilitation (Second Edition) Revised

This is the new and revised edition, which has been developed to provide the state-of-the-practice for evaluating and designing asphalt overlays for both asphalt and concrete pavements. Emphasis has been placed on alternatives to combine sound pavement management principles, accurate distress identification, and a detailed structural analysis for an asphalt overlay design to carry the projected vehicular loading. This new edition has been rewritten to reflect changes in rehabilitation strategies that took root in the late 1980s and early 1990s. Chapter 1 has been written to capture the asphalt applications available to meet demands placed on an aging national highway infrastructure Chapters 6 and 10 on Nondestructive Testing and Fractured Slab Technology respectively have been added. Chapters 12, 13 and 14 have been developed as Guide Specifications for the more popular rehabilitation techniques for concrete pavement-Rubblization, Crack/Break and Seat, and Saw-Cut and Seal Lastly, Chapter 15 on "Drainage has been expanded to include the latest innovations using longitudinal edge drains and permeable bases for use in conjunction with rehabilitation of concrete pavements. 177 pages, numerous illustrations and tables. A computerized version of the overlay thickness design procedure is also available in Windows. (See CP-4 Asphalt Pavement Thickness Design of Highways and Overlays (HWY)) - $49.00

MS-17VP - Package (MS-17 & CP-4 (HWY-in Windows)

The MS-17 Asphalt Overlays for Highways and Stree Rehabilitation manual and the computer program CP-4 Asphalt Pavement Thickness Design of Highways and Overlays (HWY - Now in Windows) together. - $129.00

MS-18 Sampling Asphalt Products for Specification Compliance (Second Edition)

Guide to obtaining asphalt samples that show true nature and condition of asphalt. Methods for sampling asphalt from vehicle tanks, above-ground stationary tanks, railroad tanks at origin and destination. Contains guide for putting vehicle tanks in proper condition for loading asphalt products; stresses necessity for strict control procedures. Illustrated, 44 pages, 150 x 225 mm (6 x 9 in.) - $8.00

MS-19 The Basic Asphalt Emulsion Manual (Third Edition)

The Asphalt Institute and the Asphalt Emulsion Manufacturers Association have revised the publication. The Basic Asphalt Emulsion Manual is the industry's key publication for explaining the general characteristics of asphalt emulsions and their uses. The Emulsion Manual will help you evaluate pavement systems for construction and maintenance, and will help you choose the emulsion that best fits your project's specific conditions. This new manual has been completely updated and contains chapters on emulsion chemistry and manufacturing, storage and handling, sampling and testing, selecting the right emulsions, and miscellaneous emulsion applications. The Emulsion Manual contains precise information about when, where, and how emulsions should be used. Contains a glossary, bibliography, and other appendices; fully indexed and illustrated with photographic and line figures; paperback, 120 pages, 220x280 mm (8.5 x 11 in.) - $28.00

MS-21 Asphalt Cold-Mix Recycling (First Edition)

Highlights methods of recycling deteriorated asphalt pavements and reusing reclaimed asphalt and aggregate materials, combining with either emulsified asphalt or hot asphalt cement. Describes procedures for removing old pavements, storing and processing reclaimed materials, and designing and constructing recycled pavements using both in place and central plant methods; 76 pages, 150 x 225 mm (6 x 9 in.) - $21.00

MS-22 Construction of Hot Mix Asphalt Pavements (Second Edition)

A valuable guide and reference for persons involved in asphalt pavement construction. Originally prepared by the Asphalt Institute under contract to the U.S. Federal Highway Administration, the manual has been completely revised and updated. It describes the procedures necessary to properly construct quality asphalt pavement. New chapters have been added on Construction Project Management, Quality Control and Acceptance of Hot Mix Asphalt, and Segregation of Hot Mix Asphalt. Retained and updated are the chapters on Materials, Mix Design, Plant Operations, Placing Hot Mix Asphalt, and Compaction. There are several appendices. - $38.00

MS-23 Thickness Design--Asphalt Pavements for Heavy Wheel Loads (First Edition)

Presents a method for thickness design of asphalt pavements for heavy-duty vehicles such as log hauling trucks, dump-body haulers, fork-lift trucks, straddle carriers, rubber-tired hoists and other vehicles having as few as four to as many as twelve or more tires. Contains 23 illustrations and 13 tables. Spiral bound, 76 pages, 220 x 280 mm (8.5 x 11 in.). The Heavy Wheel Load thickness design method is available as a computer program - (see CP-2 HWLOAD) - $18.00

SP-01 Superpave Performance Graded Asphalt Binder Specification and Testing

The Superpave Binder manual describes the new Superpave asphalt binder specification and the tests that it uses to classify asphalt binders (pressure aging, bending beam rheometer, dynamic shear rheometer, direct tension test, rolling thin film oven, and rotational viscometer.) SuperpaveTM is a product of the Strategic Highway Research Program (SHRP) asphalt research. The relationships between the binder tests and pavement performance are described, and instruction is provided for asphalt binder selection in a pavement project's given environmental conditions. Fully illustrated; 72 pages, 90 x 150 mm (6 x 9 in.) - $20.00

SP-02 Superpave Mix Design

The Superpave Mix Design manual presents the concepts and criteria involved with the Superpave asphalt mix design system. The Superpave aggregate tests and criteria are described, including aggregate concensus and source properties, the aggregate gradation control points and the restricted zone. A full Superpave mix design example is presented, including discussions of the design aggregate structure, mixture volumetrics, the Superpave gyratory compactor, and the selection of the design compaction level. Fully illustrated; 128 pages 90 x 150 mm (6 x 9 in.) - $24.00

SS-1 Model Construction Specifications for Asphalt Concrete and Other Plant-Mix Types

The Seventh Edition of this valuable reference provides model construction specifications for hot-mix asphalt mixtures. Also included are advice on procedures for developing specifications, tips on construction methods, model construction specifications hot-mixed sand asphalt. Fully indexed and illustrated, 64pp. - $10.00

SS-3 Construction Specifications for Asphalt Curbs and Gutters (Fourth Edition)

Covers materials, curb and gutter foundation, new housing areas, specifications for machine-laid hot plant-mix curbs. Illustrated; 16 pages. - $6.00

Para mayor información envíe un mail a

TELFAX: 005411-4754-9374 / 6351-6288 (whatsapp) / 5931-8727